Home / Map Skills for Travel and Outdoors

How to Find Elevation on a Topographic Map: The Contour Counting Method

Close-up of a detailed topographic map highlighting Idaho and its surrounding regions

Photo: Binyamin Mellish / Pexels

Stand anywhere on a topographic map and ask "how high is this point?" and the map answers, but in code: the contour lines around the point bracket its elevation, and your job is to decode them. This is the paper counterpart to the digital lookups in how to find elevation, and the narrow skill inside the broader craft of how to read a topographic map. Four steps, one worked example, and an honest statement of precision: that is the whole method, and it works on any topo sheet ever printed.

Interactive tool

Read the Height: Margin First, Lines Second

Check off each step as you finish it. Your progress stays on this page.

0 of 6 complete

0% done

Step One: The Contour Interval, From the Margin

Before reading any heights, find the map's contour interval: the vertical distance between adjacent contour lines, printed in the margin (on USGS quadrangles, in the bottom margin near the scale, phrased like "Contour interval 20 feet"). The interval is constant across the whole sheet, and everything else is arithmetic built on it. Intervals are chosen for the terrain: flat country sheets may use 5 or 10 feet, typical hill country 20 or 40 feet, and mountainous sheets 100 feet or more, because the lines must stay far enough apart to print. Metric sheets use meters throughout, so the first check on any unfamiliar sheet is the unit, feet or meters, which the margin also states. Every error in this method that is not a counting error is a margin error: a wrong interval or a wrong unit, faithfully multiplied. The checklist at the top of this page puts the margin first for exactly that reason.

Step Two: The Nearest Index Contour

Most contour lines are thin and unlabeled, but every fifth line is an index contour: drawn heavier, and carrying a printed elevation number somewhere along its length, with the numbers oriented to read uphill. Find the index contour nearest your point and read its number; that labeled line is your anchor, the one elevation on the sheet you do not have to compute. Follow the line with your finger if the number sits far from your point, because in dense terrain adjacent index contours interleave and grabbing the wrong anchor shifts every later step by a full index step (five intervals, often 100 feet or 200 meters of error). Note also the direction of increase: numbers read uphill, slopes rise toward the higher index, and a point's elevation must land between the two index contours that bracket it, which gives you a sanity range before you count anything.

Step Three: Count the Lines Between

From the anchor index contour, count the ordinary contour lines between it and your point, and multiply by the interval. Worked example, on a sheet with a 20 foot interval: your point sits beyond a labeled 1,000 foot index contour, three lines past it, uphill. Three lines times 20 feet is 60, so the point lies between 1,060 and 1,080 feet: above the third line (1,060) and below the fourth (1,080). That bracket is the method's true output, and learning to state it as a bracket, not a point, is the difference between reading a map and pretending to. If your point lies below the nearest index instead, count downward and subtract; if it sits in a depression, the contour lines carry small tick marks (hachures) pointing downhill into the bowl, and the counting works the same with the direction of increase reversed out of the depression's rim. The rules that govern all contour behavior, including hachured depressions and why lines never cross, are the subject of contour lines on a map.

A detailed topographic map of Dunnellon, Florida with a compass and pencil
A detailed topographic map of Dunnellon, Florida with a compass and pencil

Step Four: Interpolate Inside the Last Interval

To narrow the bracket, interpolate: estimate where your point sits between the two lines that enclose it, as a fraction of the gap, and add that fraction of one interval. If the point lies about halfway between the 1,060 and 1,080 lines, call it about 1,070 feet. Interpolation is estimation and should be reported as such, with an "about" attached, because the ground between two contours is under no obligation to rise evenly: a bench or a small cliff inside the interval is invisible at the map's resolution. The honest outputs of this method are therefore: the bracket (certain, from counting) and the interpolated value (approximate, from judgment). Field guides, trip reports, and exam answers that state a contour read elevation to the exact foot are claiming a precision the source cannot contain, and the how to read a contour map guide shows the same method applied to route profiles, where the brackets stack into a day's climbing.

When You Need Exact: Benchmarks and Spot Heights

Some points on the sheet carry printed exact elevations, and near them the counting method retires. Benchmarks, marked with an X and "BM" plus a number on USGS sheets, are surveyed points whose elevation was measured precisely; a benchmark on a summit or a road junction gives you that point's height to the foot. Spot heights are single printed numbers at summits, passes, and road forks, similarly surveyed or photogrammetrically measured. If your point of interest is a named summit, look for its spot height first; counting contours to a summit whose exact elevation is printed two millimeters away is diligence misapplied. Between benchmarks, the contour method remains the tool, and a nearby benchmark also serves as a check: count from it and confirm your interval arithmetic reproduces the terrain between the two points.

Precision, Stated Plainly

A contour reading can never be more precise than the map's interval and accuracy standards allow. National map accuracy standards historically required that tested elevations fall within half a contour interval of the true value for the great majority of points, which is a formal way of saying the bracket is the truth and the interpolation is a good guess. Add the human factors, a misread index, a miscounted line, feet read as meters, and the method's real world accuracy is "within an interval, if you were careful". For trip planning, property sense making, and understanding a landscape, that is plenty. For anything legal, structural, or flood related, the answer is a survey or the elevation datasets behind what is elevation, not a sharper pencil. Knowing which questions a topo sheet can answer is the final skill the method teaches.

Feet, Meters, and the Mixed Sheet Trap

One last margin discipline, because it produces the method's most embarrassing errors. Most USGS quadrangles are in feet; many newer and most non US sheets are in meters; and some regions publish both series side by side, so the sheet in your hands must be checked, not assumed. The interval line in the margin states the unit with the number, and the index labels follow it. A reader who counts ten lines of 20 on a metric sheet and reports "200 feet" has understated a 200 meter rise by a factor of three, an error large enough to misjudge a day's climbing badly. The same care applies to the map's vertical datum note in the margin on precise work, since elevations are measured from a defined sea level reference that has been revised over the decades; for hiking and general reading the datum is a footnote, but when you compare a map elevation against a GPS elevation and they differ by a few meters, the datum and the GPS's own height reference, not your counting, are usually the explanation. Our what is elevation gain guide picks up exactly there, turning point heights into the cumulative climbing a route actually costs.

A Second Worked Example, in Meters, Going Downhill

Repetition with the signs reversed is what makes the method stick, so run it once more on a metric sheet with a 50 meter interval. Your point, a col where a trail crosses a ridge, sits inside a labeled 1,450 meter index contour's ring, but the ground falls away from a summit: the nearest higher ground's index reads 1,450, and your point lies two lines below that index, on the outer slope. Two lines at 50 meters is 100, so the point brackets between 1,300 and 1,350 meters: below the second line down (1,350 is the line above it; count carefully: the index at 1,450, then 1,400, then 1,350, and your point just inside the 1,350 line toward 1,300). It sits about a third of the way from the 1,350 line toward the 1,300 line, so interpolate to about 1,335 meters. Notice the two places this example can go wrong, because they are the method's classic wounds: counting the index line itself as one of the steps (it is the anchor, step zero), and forgetting the direction, adding downhill lines instead of subtracting. Say the bracket aloud before the estimate, every time; the bracket is the answer the map guarantees, and the estimate is your judgment riding on it.

Related Guides

The closest companions to this guide are the travel and outdoors map skills guides below. Each one picks up a thread this page starts:

Frequently Asked Questions

How do I find the elevation of a point that is not on a contour line?

Count from the nearest labeled index contour: multiply the number of lines between it and your point by the contour interval, which gives you a bracket one interval wide, then estimate the point's position inside the bracket for an approximate value. Report the bracket, not just the estimate.

Where is the contour interval printed on a topographic map?

In the margin, on USGS quadrangles in the bottom margin near the scale bar, stated as "Contour interval" followed by the value and unit. It is constant across the sheet. Read the unit as carefully as the number, since sheets come in feet and in meters.

What is an index contour?

Every fifth contour line, drawn heavier than the rest and labeled with its elevation printed along the line, reading uphill. Index contours are the anchors of the counting method: find the nearest one, read its number, and count ordinary lines from it to your point.

How accurate is an elevation read from contour lines?

To within about one contour interval if you count carefully; the map's own accuracy standards historically held elevations to about half an interval. Interpolation inside the interval is a reasonable estimate, not a measurement. For exact values, use a printed benchmark or spot height, or a survey.

What do contour lines with tick marks mean?

Hachured contours, with small ticks on the downhill side, mark a depression: a bowl, crater, or sink where the ground falls inside the ring instead of rising. Count into a depression by treating the direction of increase as reversed once you cross its rim contour.

Photo credits: Binyamin Mellish (Pexels); Larry Hyler (Pexels). Photos are served from this site; follow the credit to the library page for the original.