Home / Map Skills for Travel and Outdoors

What Is Elevation Gain? The Climbing Number, Worked Out in Full

A hiker in a yellow shirt crosses a wildflower field below mountain views

Photo: Rohit George / Pexels

Two hikes can start and end at the same elevations and be utterly different days. One rolls gently uphill the whole way. The other dives into a gorge and climbs out, twice. The number that tells them apart is elevation gain: the sum of every upward step on the route, with the descents ignored. It is the single best predictor of how hard a hike or run will feel, it appears on every trail page and fitness app, and it is chronically misunderstood, because most people quietly assume it means the difference between the start and the finish. This article defines it exactly, works a complete example with the arithmetic shown, explains why two apps report two different gains for the same trail, and gives you difficulty bands and a route-judging checklist you can use on any trail description from now on.

If the word elevation itself needs grounding first, what is elevation is the five-minute foundation. This article assumes it and builds upward, appropriately.

Interactive tool

Judge Any Route: Elevation Gain Checklist

Check off each step as you finish it. Your progress stays on this page.

0 of 7 complete

0% done

The Definition, and the Worked Example

Elevation gain is the sum of all the climbing segments along a route. Descents do not subtract. Flat contributes nothing. The matching statistic, elevation loss, sums all the descending segments the same way, and the difference between gain and loss is the net elevation change, start to finish.

Work the canonical example in full. A trail profile, in order: it climbs 200 m, then descends 100 m, then climbs 150 m to the summit.

  • Elevation gain = 200 + 150 = 350 m
  • Elevation loss = 100 m
  • Net change = 350 − 100 = +250 m, which matches the summit sitting 250 m above the trailhead.

Now feel the definition. The hiker's legs climbed 350 m of hill, not 250. The 100 m descent was not a refund; it was a toll paid in knees, and then the trail climbed again. This is why gain, not net, predicts effort, and why a route that ends where it starts (gain and loss equal, net zero) can still be a serious day: a loop with 800 m of gain has net change of nothing and will inform your calves of the fact.

The Three Numbers, Side by Side

NumberDefinitionWhat it is good for
Elevation gainSum of all climbsPredicting effort; comparing routes
Elevation lossSum of all descentsPredicting knee load and descent time
Net changeFinish elevation minus start elevationShuttle logistics; knowing where you end up

Trail pages usually headline gain, and now you know why. But read all three when they are offered: a point-to-point route with gain 400 and loss 900 is a mostly-downhill day with a car shuttle implied, and a loop's gain and loss should match within a few meters, so a big mismatch on a loop is a data error worth noticing before you trust the rest of the listing.

Why Your App and Your Friend's App Disagree

Record the same hike on two apps and the gains will differ, sometimes by 20 percent. Neither is lying; they are filtering. GPS elevation is noisy, jittering up and down by several meters even when you stand still, and naive summing would turn that jitter into phantom climbing. So every app smooths the elevation trace and applies a threshold: climbs smaller than some cutoff (a few meters) are ignored as noise. Different thresholds, different totals. Barometric phones measure pressure changes and produce cleaner traces than GPS-only phones, adding a second source of divergence. The practical wisdom: compare gains only within one app and one device type, treat any single figure as an estimate with a soft edge, and distrust to the meter any gain quoted from a phone held in a swinging hand. For planning, round numbers are honest numbers: 350 and 380 are the same hike.

A hiker with a backpack looks over a coastal view from a high path
A hiker with a backpack looks over a coastal view from a high path

Difficulty Bands (Always Paired With Distance)

Gain alone does not grade a hike; gain per distance does. A working scale for a day hike, for a reasonably fit walker:

GainOver a short day (under 8 km)Over a long day (15 km+)
Under 150 mGentleEasy
150 to 400 mModerateModerate
400 to 800 mHardDemanding
800 to 1,200 mVery hardA serious mountain day
Over 1,200 mExceptionalExpedition territory for most walkers

Read the table by finding your distance first. Four hundred meters of gain spread over 15 km is a rolling walk; the same 400 packed into 5 km is a staircase with scenery. Trail difficulty ratings in apps like those in best hiking map app combine gain, distance, and terrain in their own ways, which is why two sources can grade one trail differently and both be defensible; the gain and distance figures beneath the rating are where the truth lives.

Time: Naismith's Rule

A Scottish mountaineer gave us the classic estimate in 1892, and it still anchors planning: allow one hour for every 5 km of distance, plus one hour for every 600 m of elevation gain. Our worked-example trail, say it is 10 km with its 350 m of gain, estimates at 2 hours for the distance plus about 35 minutes for the climbing: roughly 2 hours 35 minutes of moving time, before stops, weather, and photography take their honest shares. Descents are not free either; steep descents slow many walkers more than the climb did, a refinement later walkers added to Naismith and your knees already know. Use the rule to sanity-check any app's cheerful time estimate before you commit to a ridge at 4 p.m.

The Profile Exercise: Compute It Yourself

Here is a route profile as a list of elevations at each kilometer marker: 1,000, 1,080, 1,040, 1,160, 1,120, 1,300 (all meters). Compute the gain before reading on. Segment by segment: +80 (climb), −40 (ignore for gain), +120 (climb), −40 (ignore), +180 (climb). Gain = 80 + 120 + 180 = 380 m. Loss = 80 m. Net = +300 m, matching the last marker minus the first (1,300 − 1,000). If you got 300 for the gain, you computed the net, and you have just felt, in your own arithmetic, the exact confusion this article exists to cure. Do this exercise on real trail profiles, the elevation graph in your hiking app is the same list drawn as a picture, and the skill transfers whole.

Related Guides

This guide does not stand alone. The travel and outdoors map skills guides below take up the questions it leads into:

Frequently Asked Questions

Is elevation gain the same as how high the summit is?

No. Summit elevation is where the top sits above sea level. Gain is how much climbing the route does to get there. A cable car mountain can have a summit at 3,000 m and a walking route gain of 1,200 m from its trailhead, while a coastal cliff walk summits at 150 m with 600 m of gain from its endless ups and downs. Legs care about gain; maps label elevation.

Why is my elevation gain different from the trail sign or my friend's number?

Because gain is computed from a noisy elevation trace, and every app smooths and thresholds that noise differently, and barometric and GPS-only devices produce different traces to begin with. Small disagreements are the system working as designed. Compare like with like, and treat all phone-derived gains as estimates within roughly ten to twenty percent.

Does elevation gain count descents at all?

No, that is its defining feature. Descents are totaled separately as elevation loss. The two together describe the route's vertical work completely: gain for the climbs your muscles powered, loss for the descents your knees absorbed, and net change as the difference between them.

How much elevation gain is a lot for a beginner?

For a first season of hiking, days under about 300 m of gain build fitness and confidence without wrecking the next morning. Between 300 and 600 m is a solid intermediate day. Beyond 800 m, most beginners should be choosing the route deliberately, starting early, and carrying the water and layers the number implies. Distance matters as much, as the bands table shows.

Do runners and cyclists use elevation gain the same way?

Yes, with their own scales. Runners treat gain as the honest currency of trail difficulty, and races advertise it ahead of distance sometimes. Cyclists feel gain through gradient as well: the same 500 m packed into one climb is a different event from 500 m of rolling. The definition never changes; only the bodies paying it do.

Can I see elevation gain before I hike a route?

Yes. Every serious trail listing shows the route's elevation profile, the graph of height against distance, and its computed gain; the apps compared in best hiking map app all do this for free at the planning stage. Read the profile, not just the total: two climbs with a rest between them walk differently from one wall of the same total gain.

Is elevation gain more important than distance?

For effort, usually yes, once distance passes the trivial. Doubling a hike's distance roughly doubles its time; doubling its gain can more than double its difficulty, because climbing recruits more muscle, more breath, and more caution per meter than flat walking. Experienced hikers scan a route description in the order gain, distance, terrain, and this article's bands table exists to make that scan a habit: the gain figure is where a route confesses what kind of day it intends to be.

Photo credits: Rohit George (Pexels); Lenskachakkar . (Pexels). Photos are served from this site; follow the credit to the library page for the original.