Start with the disappointment, because every searcher for this topic hits it: Google Maps does not display elevation for a point. Drop a pin and the card shows coordinates, photos, reviews, everything except the height. Search the menus and no elevation readout appears. This is not a setting you have missed; the feature is not there. What Maps does offer is older and, once learned, better: a Terrain layer whose contour lines are labeled with heights, turning the whole map into a topographic sheet you can read anywhere. This guide teaches that reading properly, then shows the two Google doors that do give exact numbers, Google Earth for a point and Earth Pro for a path.
Home / Map Skills for Travel and Outdoors
How to Find Elevation on Google Maps: Reading the Number the App Hides in Its Contours

Photo: Eva Hamitaj / Pexels
Distance Measurer: Measure the Line You Just Profiled
You read the heights off the contour lines; now measure the ground they cross. Click the start and end of your line and read the true distance, then divide the height change by it for the slope the contours were describing.
Total straight-line distance, 0 points
Click the map to start
Distances are great-circle (haversine, mean Earth radius 6,371 km): the shortest path over the surface, not a road or trail distance. Map data © OpenStreetMap contributors.
Door One: The Terrain Layer and Its Contour Lines
On a computer, open Google Maps, click the Layers control (the stacked squares at the bottom left of the map), choose the Terrain view, and zoom into land with relief. On the phone app, tap the layers icon (the diamond stack at the top right), select Terrain under map type, and close the panel. The flat map gains shaded hills and, crucially, thin brown contour lines, some carrying small gray numbers.
Those numbers are elevations, and the lines are the whole method. A contour line joins points of equal height. The numbered ones are index contours, the anchors. Every unlabeled line between two index contours divides the interval equally. Reading any spot becomes a three step skill:
- Find the two index contours that bracket your spot and read their numbers.
- Count the unlabeled lines between them to get the interval each line represents.
- Count lines from the lower index contour up to your spot, multiply, and add.
A reading exercise, with the numbers doing the teaching: suppose the bracketing index contours read 1,200 and 1,300 (meters or feet; the next section settles which), with four lighter lines between them. Five equal steps span 100, so each line is 20. Your spot sits two lines above the 1,200 line: its elevation is about 1,240. That is the entire craft. Everything else is refinement: lines packed tight mean steep ground, lines spread wide mean gentle ground, and lines forming closed loops mean a summit or a depression, told apart by the numbers rising or falling toward the center.
Which Unit Are the Gray Numbers?
The contour labels follow your Google Maps language and region settings, and they do not print their unit on the line itself, which causes real confusion in the field. In the United States the labels are feet; in most of the world, meters. The sanity check is a known anchor near you: find a summit or a town whose elevation you know from our elevation hub guide, and see which unit makes the contour labels agree with it. A label of 1,609 near Denver is meters agreeing with the mile high city; a label of 5,280 is the same fact in feet. When the two candidate readings differ by a factor of about 3.28, you are looking at a unit question, never a terrain question.
What Terrain View Cannot Do
Be clear about the limits, because they define when to change doors. The contour method gives an interpolated estimate between lines, honest to the contour interval, not a surveyed point height. At wide zooms the contours generalize and thin out; at very close zooms in flat country they vanish entirely, which is information of its own kind: no contours means no relief worth drawing, and a plain that flat sends you to Door Two for any number at all. And the satellite view, however beautiful, carries no heights; switching to it for elevation is the classic wrong turn. Terrain is a map type, not an overlay on satellite, in the phone app's layer panel.

Door Two: Google Earth, for the Exact Point
When the question is "the elevation of this exact spot", leave Maps. Open Google Earth (earth.google.com in a browser, or the Earth app), search or navigate to the point, and read the readout: the web version shows the elevation of the ground under the view alongside the coordinates as you move and zoom, and the app shows it for searched places and dropped pins. Earth reads from elevation data rather than contours, so the number is a point value, dataset backed, of the kind our hub guide rates within a meter or two in well mapped countries. This is the right door for an address, a summit, a trailhead, a property corner's neighborhood: one point, one number, no line counting.
Door Three: Google Earth Pro, for a Path's Profile
For a route, a hike, a ride, a pipeline of curiosity, the tool is the free desktop Google Earth Pro. Draw the path with the path tool along your route, save it, then right-click the path and choose Show Elevation Profile (under the Edit menu on some versions). A chart opens under the map: height against distance, with the statistics that matter, total gain and loss, maximum and minimum elevation, and the steepest grades. Move the cursor along the chart and a marker walks the map, so any spike can be inspected where it lives. This profile is the single most useful elevation picture a trip planner can own, and it is the same chart our elevation gain guide teaches you to read skeptically, since gain numbers depend on how finely the path is sampled.
The Three Doors, Chosen in One Breath
Inside Google Maps, on the move, with the app already open: Terrain layer and contour reading, good to the contour interval. At a desk, needing one spot's number: Google Earth, point readout. Planning a route and needing its shape: Earth Pro, elevation profile. Notice what happened to the original question: "how to find elevation on Google Maps" dissolves into "which Google tool answers my kind of elevation question", and now you own all three answers. The Distance Measurer above belongs in the same kit: once you can read heights off contours, measuring the ground distance between them turns two heights and a distance into a slope, which is what the contours were describing all along. For the paper ancestors of the Terrain layer, and the full reading craft, our topographic map guide goes the whole way.
A Worked Transect: Reading a Climb Before You Walk It
Put the skill together on an imaginary but honestly labeled ridge, the way a teacher would on a whiteboard. You are planning a walk from a trailhead to a summit, and the Terrain layer is open. The trailhead sits between index contours reading 800 and 900, close to the 800 line: call it about 820. The path climbs through lines that bunch tightly, and bunching is the map's word for steep. Halfway along, you cross the 1,100 index contour; the lines then spread out, a gentler shelf, before bunching again into closed loops at the top, the innermost labeled 1,400, with your summit inside it, so the top is somewhere above 1,400 and below the next interval up. Without any other tool you already know the shape of your day: roughly 600 of climbing, a steep start, a breather in the middle, a steep finish. That is a planning grade answer, and for choosing between two routes or judging whether the walk fits your knees, it is the answer that matters.
Now make it a slope. Pick the steep opening section: suppose the contours say you gain 200 of height across a stretch the Distance Measurer above reads as 500 meters of ground. Slope is rise over run: 200 divided by 500 is 0.4, a 40 percent grade, which in the angle language is about 22 degrees from horizontal. Numbers like that translate contours into consequences: 40 percent is a scramble with trekking poles earning their keep, while the shelf at, say, 30 of rise over 600 of run is 5 percent, a stroll. The two tools together, contour reading for height and the measurer for distance, reconstruct the third dimension of any landscape on the screen, which is precisely the trick a paper topographic map taught with a ruler and a pencil. Nothing about the method is new; Google simply put the sheet in your pocket.
Terrain on the Phone Versus the Desktop
The reading works on both, with different temperaments. The desktop wins for planning: a large screen shows whole contour systems at once, the index numbers are legible without pinching, and you can hold a valley's shape in view while you reason about it. The phone wins in the field, at the moment of "is this rise the last one", where a quick Terrain check answers from the ground you are standing on. Its costs are screen size and the temptation to read at too wide a zoom, where the contours generalize into decoration. The discipline that transfers: zoom until the index numbers are readable and the lines around your position are distinct, then read. If the numbers will not resolve, you are too far out, and the honest move is to zoom or to switch doors to Google Earth's point readout, which trades the shape for a single certain figure. Knowing which of the two you need, shape or figure, is most of elevation literacy, and it is a judgment this article has been quietly teaching from its first paragraph.
Related Guides
This guide does not stand alone. The travel and outdoors map skills guides below take up the questions it leads into:
- How to Find Elevation on Apple Maps: Route Charts, City Place Cards, Contours, and the Compass Trick: Apple Maps hides elevation in three places and withholds it in a fourth.
- How to Find Elevation on onX: Readouts, Contours, Elevation Bands, and Profiles: onX answers the elevation question on more surfaces than most users ever open: the current-location readout pairs your coordinates with your...
- How to Find Elevation on Google Earth: Cursor Readout, Profiles, and Honest Limits: Google Earth answers the elevation question in four different places, and they are not interchangeable: the cursor readout in the corner of the 3D...
Frequently Asked Questions
Why does Google Maps not show elevation when I tap a place?
Because the feature does not exist in Google Maps. A pin or place card shows coordinates and details, never height. Google's design puts point elevation in Google Earth instead. Inside Maps itself, the only elevation information is the Terrain layer's labeled contour lines, which this guide teaches you to read.
How do I turn on the Terrain layer in Google Maps?
On a computer, click the Layers control at the bottom left of the map and select Terrain. In the phone app, tap the layers icon at the top right, choose Terrain under Map type, and close the panel. Zoom into hilly country and the contour lines with their gray elevation numbers appear.
Are Google Maps contour numbers in feet or meters?
They follow your region and language settings: feet in the United States, meters in most of the world, with no unit printed on the line. Verify with a known anchor nearby, a summit or town of known elevation. If the two readings differ by about 3.28 times, it is a unit difference, not a terrain difference.
How accurate is elevation read from Google Maps contours?
As accurate as the contour interval at your zoom: you are interpolating between lines, so expect to be right within roughly one interval, which tightens as you zoom into detailed terrain. For an exact point value, use Google Earth's readout, which samples elevation data directly and is typically good to a meter or two in well mapped countries.
How do I get an elevation profile for a hike or ride?
Use the free desktop Google Earth Pro. Draw your route with the path tool, save it, right-click the path, and choose Show Elevation Profile. The chart shows height against distance with total gain and loss, highest and lowest points, and grades, and moving along the chart moves a marker on the map so you can inspect any climb where it happens.
What does it mean when no contour lines appear?
Either you are zoomed too far out, the Terrain layer is not on, or the land is genuinely flat: contours only exist where height changes. On a true plain, no zoom will conjure lines, and the correct tool is Google Earth's point readout, which returns a number even where the whole horizon sits within a meter of itself.
Photo credits: Eva Hamitaj (Pexels); Stan Swinnen (Pexels). Photos are served from this site; follow the credit to the library page for the original.