Home / Map App How-Tos

How to Drop a Pin on Google Maps

How to Drop a Pin on Google Maps | Osm4People

A dropped pin marks one exact spot on the map, even a spot with no address: a trailhead, a side gate, the corner where you parked. On a phone you drop one by touching and holding the spot. On a computer you drop one with a single click. Everything else in this guide is what to do with the pin once it exists: save it, share it, navigate to it, and read the coordinates it carries.

To practice before you need it for real, use the Coordinate Explorer on this page: click anywhere on the live map and it drops a marker and shows that spot in every coordinate format at once.

Interactive map

Coordinate Explorer

Click anywhere on the map and read the exact coordinates of that spot in every format. Drag the map, zoom in, and click again to explore.

Decimal degrees40.689167, -74.044444
Latitude40.689167° N
Longitude74.044444° W
Degrees minutes seconds40° 41' 21.00" N, 74° 02' 40.00" W
Degrees decimal minutes40° 41.350' N, 74° 02.667' W
Plus code87G7MXQ4+M67

Map data © OpenStreetMap contributors. Coordinates are read from the map itself, in the WGS 84 system your phone uses.

What a Dropped Pin Is, and What It Is For

A dropped pin is a marker you place by hand. It is different from the blue dot, which is your phone reporting where you are, and different from a business listing, which is a place Google already knows about. A pin can sit anywhere: in the middle of a park, on a beach access path, on a rural road with no house numbers, or on the exact parking bay you want to find again tonight.

That freedom is the whole point. Addresses describe buildings, and they often resolve to a street center or a front entrance that is not where you actually need to be. A pin describes a point, and a point is what you need in these common jobs:

JobWhy a pin beats an address
Meeting a friend outdoorsThe pin is the exact bench, gate, or corner, not the park name
Marking a trailheadTrailheads often have no address at all, and the parking lot may be far from the named trail
Remembering where you parkedA pin on your bay works in a huge lot where every row looks the same
Sharing a pickup spotThe driver navigates to your pin instead of circling the block looking for a doorway
Marking a delivery or service entranceThe pin can sit on the loading door at the back, not the lobby at the front
Saving a spot you found while exploringA viewpoint, a fishing access, a quiet beach: drop a pin now, decide later

One warning before the steps: a fresh dropped pin is temporary. If you close the app or drop another pin, the first one is gone unless you save it. The saving steps below take ten seconds and turn a temporary marker into a place you can return to for years.

How to Drop a Pin on Android

Open the Google Maps app and get the right area on screen first. You can search for a nearby town or landmark to jump close, then pan and zoom by hand for the final stretch. Zoom in further than feels necessary. The closer you zoom before you press, the more precise the point under your finger will be.

  1. Touch the exact spot and hold your finger still for about a second.
  2. A red pin drops at that spot and a card slides up from the bottom of the screen labeled Dropped pin.
  3. The card shows the nearest address if one exists, plus the coordinates of the point.
  4. Swipe the card up to see your options: Directions, Save, Share, and Download for offline use where available.

If nothing happens, you probably tapped instead of holding, or you pressed on a labeled place. Both failures are covered in the troubleshooting section below. If the pin lands a few meters off, hold again on the corrected spot: a new long press moves the pin.

How to Drop a Pin on iPhone

The flow in Google Maps on iPhone is nearly identical to Android, which is helpful if your group mixes phones.

  1. Open the Google Maps app and pan and zoom to the spot, zooming in close.
  2. Touch and hold the spot until the red pin appears. You will feel a light tap of feedback when it drops.
  3. A Dropped pin card appears at the bottom with the nearest address and the coordinates.
  4. Swipe the card up for Directions, Save, and Share.

The one difference to know: on iPhone you also have Apple Maps installed, and Apple Maps uses a similar touch and hold gesture. The steps in this article are for Google Maps specifically, so check which app you opened if the card looks different from the description above. If you are deciding which app deserves your pins and lists, our comparison of Apple Maps vs Google Maps walks through the tradeoffs.

How to Drop a Pin on Desktop

On a computer, open Google Maps in your browser and find the area by searching or by dragging and zooming the map.

  1. Left click once on the exact spot.
  2. A small gray marker appears, and a small card pops up at the bottom of the screen showing the nearest address and the coordinates of the point you clicked.
  3. Click the coordinates in that card. A full panel opens on the left with the place details and buttons for directions, saving, and sharing.

A right click gives you a different tool: a menu with options such as Directions to here, Directions from here, and Whats here. Right click is the fastest way to start a route ending at an unnamed point. Left click is better when you want to inspect, save, or copy the coordinates first.

How to Save a Pin So It Does Not Disappear

Saving attaches the pin to your Google account, so it shows up on every device where you are signed in.

On a phone, drop the pin, swipe its card up, and tap Save. Pick a list, such as Favorites, Want to go, or Starred places, or create a new list with a name that will make sense in six months, like Trailheads or Client sites. You can add a note to the saved entry on many versions of the app, and a short note like "gate code on the fence post sign" is often the most valuable part of the whole save.

On desktop, click the spot, open the full panel from the coordinates card, and click Save, then choose the list.

Saved pins persist, and you can share an entire list with a hiking group or a family so everyone navigates to the same trailhead instead of three different parking lots. If you keep many pins, lists are the difference between a useful personal atlas and a screen full of identical stars.

How to Share a Pin

Sharing is the feature that makes pins worth learning, because a pin travels as a link that opens at the exact point in Google Maps on the receiving phone.

On a phone, drop the pin, swipe the card up, and tap Share. The system share sheet opens, and you can send the link by text message, chat app, or email. On desktop, open the panel for the point and click Share to copy a link you can paste anywhere.

Two habits make shared pins actually work. First, add a sentence when you send one: "meet at this pin, it is the north gate, not the main entrance" prevents the most common failure, which is your friend navigating to the pin but then looking for you at the obvious entrance instead. Second, if the spot has no signal, warn them to load the area before they leave coverage, or better, send the coordinates as text too. A link needs the app and usually a connection to resolve; raw coordinates work in any map app, even offline. The guide to how to find coordinates on a map shows how to paste coordinates into a map and land on the point.

How to Get the Coordinates and Plus Code of a Pin

Every pin carries exact coordinates, and reading them turns a visual marker into information you can write down, dictate over the phone, or type into a different app or a dedicated GPS device.

On a phone, the Dropped pin card shows the coordinates directly, usually as two decimal numbers. Swipe up on the card to see them in full, and tap them to copy where the app offers that option. On desktop, the coordinates are in the small card at the bottom the moment you click, and clicking them opens the full panel.

Here is a worked example using a landmark, the Statue of Liberty in New York Harbor. A pin dropped on the statue sits at these values:

FormatValue for a pin on the Statue of Liberty
Decimal degrees40.689167, -74.044444
Degrees, minutes, seconds40° 41' 21.00" N, 74° 02' 40.00" W
Plus code87G7MXQ4+M67

The three formats say the same thing three ways. Decimal degrees are what apps store and what you should copy for digital use. Degrees, minutes, seconds are the older style still used in some charts, documents, and GPS devices, and our guide to latitude and longitude format explains how the pieces convert. The plus code is a short code designed to be spoken and typed by hand, handy where street addresses are missing or unreliable; what is a plus code explains how the code is built and when to prefer it.

Each decimal place you add narrows the point, and at six decimal places a coordinate identifies a spot within about the length of your hand. If you copy coordinates, copy all the digits. Rounding 40.689167 to 40.69 moves the point by roughly 90 meters, enough to put your friend on the wrong side of a park.

How to Remove a Pin

Removing a temporary pin is simple: tap or click anywhere else on the map, or close the Dropped pin card by tapping the X or swiping it down, and the pin clears. Nothing is deleted, because nothing was stored.

Saved pins need one more step. On a phone, open the Saved tab at the bottom of Google Maps, open the list that holds the place, tap the entry, and remove it from the list. On desktop, open the Saved panel from the menu and remove the entry there. Deleting a saved pin from a shared list removes it for everyone who uses that list, so edit shared lists with care.

Why It Did Not Work: Tap Versus Long Press

Almost every failed pin comes from one of three causes, and each has a quick fix.

The most common is the tap. A quick tap on empty map does nothing, and a quick tap on a labeled place opens that place page instead of dropping a pin. The fix is the gesture itself: press and hold on an unlabeled patch of map until the red pin appears. If the spot you need is covered by a label, zoom in until there is clear map beside the label, or press on the exact ground next to it and adjust.

The second cause is pressing on your own blue dot or on a transit station or business icon, which opens that item card. Zoom in and press the bare map a few meters away, then fine tune with a second long press.

The third cause is a case or screen protector making long presses unreliable, or the press sliding into a pan. Plant your finger and keep it completely still for a full second. If the map moves under your finger, the app reads a drag, not a hold.

Related Guides

If this page answered part of the question, these map app guides cover the rest of the same ground:

Frequently Asked Questions

Does a dropped pin work without an internet connection?

You need a connection to load the map and drop a new pin in most cases, because Google Maps fetches map data as you pan. If you have downloaded the area for offline use, you can view that map and work with saved places offline. Our guide on how to download offline maps shows how to save an area before you lose signal.

Can other people see my dropped pins?

No. A dropped pin is private to your device and, once saved, to your Google account. Other people see a pin only when you share it, by sending the share link or by sharing a saved list that contains it. Sharing a single pin does not expose your other saved places.

How accurate is a dropped pin?

The pin sits exactly where you pressed, so its accuracy is about your zoom level and your finger, not about GPS. Zoomed fully in on a clear map, you can place a pin within a few meters of the true spot. Zoomed out over a whole city, the same press can be off by hundreds of meters, so always zoom in before the long press.

Can I drop more than one pin at a time?

In the standard map view you work with one dropped pin at a time; dropping a new one replaces the old. To keep many points, save each pin to a list as you go, and the list will show all of them on the map together. That save as you go habit is the practical answer for trip planning and field work.

What is the difference between a dropped pin and a saved place?

A dropped pin is the temporary marker you create with a long press or a click. A saved place is that same point stored in a list in your account, where it persists across sessions and devices and can be given a list name and shared as part of the list. Dropping is the act; saving is what makes it last.