Home / Map App How-Tos

How to Find Alternate Routes in Google Maps: The Gray Lines, Explained

Aerial view of a multi-lane highway filled with traffic

Photo: Freysteinn G Jonsson / Pexels

The blue line in Google Maps is a recommendation, not an order, and it is not the only route the app computed. On most drives of any length, Maps quietly draws one or more alternates in gray, each carrying its own time label, and those gray lines are the answer to a question drivers ask constantly: is there another way? This guide covers where alternates live on every surface, the preview screen before you start, the mid-drive switch when traffic ahead turns ugly, and the desktop, plus the two levers that reshape the whole set: the avoid toggles in Route options and the humble added stop, which forces Maps to build its route through the road you actually want. Planning a trip with several stops of your own is a different job, owned by our Google Maps route planner guide; this article is about choosing among the routes Maps itself offers.

Interactive tool

Let the Gray Lines Vote: The Alternate Routes Checklist

Check off each step as you finish it. Your progress stays on this page.

0 of 8 complete

0% done

Before You Start: The Gray Lines on the Preview

Ask for directions and look at the map before you tap Start. The recommended route is drawn in blue. Alternates are drawn in gray, and each gray line carries a label with its own estimated time, often with a note about what defines it: via a particular highway, or a warning that it includes tolls. Tap a gray line and it turns blue, promoted to the chosen route, while the old recommendation fades to gray; the directions list, the total distance, and the arrival estimate all update to the route you picked. This preview moment is the cheapest decision point of the whole drive, because switching costs nothing and you can compare the shapes honestly: the gray route that adds four minutes on paper may run on roads you know and trust, avoid the interchange that jams every Friday, or pass the fuel stop you needed anyway. Read the time labels with one caution. They are estimates built from current traffic, and a gray route labeled six minutes slower at departure can be the faster drive by the time the blue route's incident has finished ripening. Maps re-evaluates as you drive and may offer to move you, but the driver who checked the alternates at the preview already knows the geography of the choice when the offer comes.

Switching Mid-Drive Without Starting Over

Alternates do not vanish when navigation starts. While you are driving, Maps keeps computing them, and when a meaningfully faster route appears it offers the switch directly, a prompt naming the minutes saved, which you can accept or let pass. You can also ask for the alternates yourself: the routes or alternate-route control in the navigation interface redraws the gray options around your current position, each labeled with its time from where you are now, not from where you started. Two disciplines make mid-drive switching safe and useful. First, let a passenger tap, or make the change while stopped; an alternate evaluated at a red light is a decision, while one evaluated at highway speed is a distraction. Second, understand what switching really trades. The new route's estimate restarts from your position, so a switch that looks equal on the label can still win by moving you off a corridor whose traffic is deteriorating, or lose by trading a highway you know for surface streets with forty traffic lights between you and home. When the offered saving is small, a minute or two, staying on the route you are already set up for is usually the calmer drive; when it is large, the app has usually seen an incident you have not reached yet.

On a Computer: Drag the Blue Line Onto Your Road

The desktop site offers a power the phone hides: you can pull the route itself. Get directions, then grab the blue line with your mouse and drag it onto the road you prefer. White circle handles appear along the route, and dragging one anchors the route through that point; Maps recalculates the legs on either side to honor your anchor while keeping your start and destination. This is how you force the scenic road, the bridge you trust, or the valley route instead of the ridge, without building a multi-stop itinerary. Release the drag and the route snaps to the road network through your point, with distance and time updated to the route as dragged. Dragging has honest limits worth knowing. The result is a route for this session: it is excellent for checking what your preferred way costs in minutes and miles, and for printing or sending, but a dragged route is not a durable saved object, and our companion guide on how to save a route in Google Maps explains exactly which kinds of routes can be pinned and kept, and which cannot. Used together, the two skills cover the whole loop: drag to discover your way, then pin what is pinnable and accept what is not.

Top-down aerial view of highways and roundabouts forming a road network
Top-down aerial view of highways and roundabouts forming a road network

Route Options: The Avoid Toggles Reshape Everything

Under the directions fields sits Route options, and its three toggles, avoid highways (called motorways in some regions), avoid tolls, and avoid ferries, filter every route Maps offers, blue and gray alike. Turn on avoid tolls and the toll road vanishes from the set entirely; the alternates you are shown are the best of what remains. This is why two drivers asking for the same drive can see different gray lines: their toggles differ. The toggles persist, so the avoid you set for one trip quietly governs the next one, a classic source of the complaint that Maps has started routing strangely. Our dedicated guide to avoiding tolls in Google Maps treats the toll toggle and its costs in depth. The working habit is to treat Route options as part of the alternate-routes toolkit, not as settings to set once and forget: when the offered routes all look wrong, check the toggles before blaming the map, and when a gray alternate is mysteriously absent, a toggle is usually the reason. Note also what the toggles cannot do. They filter road classes, not neighborhoods, scenery, or road quality, and there is no avoid-this-specific-street switch; for that, the tool is the added stop in the next section.

Force a Route With One Well-Placed Stop

When neither the gray lines nor the toggles produce the way you want, add a stop. In the directions panel, add a destination and name a place on the road you intend to take, a town, a fuel station, a viewpoint. Maps now must build the route through that point, and the result is often exactly the alternate that was never offered. The stop need not be a real errand; it is a steering device, and on arrival you can simply drive through it while navigation continues to the real destination. Choose the steering stop with care: place it past the junction where the unwanted route diverges, or Maps may route you to the stop by the very road you were avoiding and back again. This technique is the bridge between choosing routes and planning them. One stop is steering; several stops with an order of your own is itinerary building, and that craft, including how Maps caps added stops and refuses to optimize their order for you, is taught in full in our Google Maps route planner guide. Kept in its lane, though, the single added stop is the most reliable way to make the blue line go where local knowledge says it should, and it survives the trip from desktop planning to the phone in the car better than a dragged line does.

When the Slower Gray Line Is the Better Drive

The labels invite a purely arithmetic reading, blue is fastest, gray is slower, take blue, and that reading throws away most of what the alternates are for. A gray route priced four minutes slower can be the better drive for reasons the estimate cannot see. It may run on a divided highway instead of a two-lane road with a single notorious junction, trading minutes for a kind of safety no label reports. It may avoid the corridor where a stadium empties, a school zone stacks up, or a Friday exodus forms, events whose traffic is real but only partly visible to the model at departure time. It may simply be the route you know: the one where you know which exit sneaks up, which merge is short, and where the fuel is cheap, and a familiar road driven calmly is frequently faster in fact than a nominally faster road driven tense. The mature way to use the preview is to read each gray label as two numbers, the printed estimate and your own adjustment for what you know about the roads involved, and to let the second number speak. Maps is a superb estimator of the average driver's next hour; you are the only estimator in the car of yours.

A Note on Walking, Cycling, and Transit Alternates

Everything above is written from the driver's seat, because driving is where alternates are richest, but the other modes have their own versions of the same idea. Walking directions offer alternate paths where the street network allows, and their labels trade in minutes and distance alone, there being no traffic on a footpath worth the name. Cycling alternates are the most opinionated in the app: the choices often differ by kind, not just by time, a flatter way against a shorter way, a protected-lane corridor against a direct road, and the elevation graph attached to each option is part of the label, as real a cost to a cyclist as minutes. Transit directions present their alternates as a list rather than as lines, combinations of lines and departures, where choosing is less about geography than about departure time, number of changes, and walking at each end. The habit that transfers across all four modes is the one this article teaches for driving: never accept the first offer blindly. The first route is the algorithm's answer to the average traveler. The alternates, one tap away in every mode, are where your own knowledge of your journey gets its vote.

Related Guides

Readers working through this topic usually need its closest companions too. These map app guides cover the neighboring ground:

Frequently Asked Questions

Where are alternate routes in Google Maps?

On the directions preview, alternates are drawn in gray with their own time labels next to the blue recommended route. Tap a gray line to select it. During navigation, Maps offers faster alternates as they appear and exposes the current alternates through the routes control.

Why do I see no gray alternate routes?

Some drives genuinely have one sensible route, especially short trips and rural areas with a single connecting road. Alternates can also be hidden by your Route options: an avoid toggle may have filtered the set down to one survivor.

Can I switch routes while already driving?

Yes. Maps prompts you when a faster alternate appears, and you can open the alternates view mid-drive to compare times from your current position. Make the change while stopped or let a passenger tap; the estimates restart from where you are.

How do I make Google Maps take a specific road?

Three ways, in increasing force: pick the gray alternate that uses it, drag the blue line onto it on a computer, or add a stop located on that road so every offered route must pass through it. The added stop is the method that survives best on the phone.

Do alternate routes update with traffic?

Yes. The time labels on gray routes are live estimates, and the set itself is recomputed as traffic changes. A route that starts six minutes slower can become the faster option, which is why Maps may offer a mid-drive switch.

Photo credits: Freysteinn G Jonsson (Pexels); Lio Voo (Pexels). Photos are served from this site; follow the credit to the library page for the original.