Home / Coordinates and Location Formats

How to Find the Centre Coordinates of a Circle: Four Methods, Worked in Full

Black and white close-up of a compass and ruler on a map for cartographic purposes

Photo: Ronaldo Guiraldelli / Pexels

Every circle problem, in coordinates, is secretly a centre problem. The radius gets the glory, but the centre coordinates, usually written (h, k), are what position the circle on the plane, and finding them is a small set of reliable moves. This guide covers the four situations you will actually meet: the equation already in standard form, the equation in general form, the two endpoints of a diameter, and three points on the circumference. Each method is worked in full with numbers that check, including the sign trap that produces the most wrong answers in this whole topic. (The site writes "center" in American spelling elsewhere; this guide keeps the query's "centre" in its title and uses center in the text. The mathematics, happily, does not care.)

Interactive map

Coordinate Explorer: Read the Endpoints Off a Real Map

Click the two ends of a diameter across any circular feature, a roundabout, a crater, a turning circle, and note both pairs. Their midpoint, by this article third method, is the center, and half the distance between them is the radius.

Decimal degrees40.689167, -74.044444
Latitude40.689167° N
Longitude74.044444° W
Degrees minutes seconds40° 41' 21.00" N, 74° 02' 40.00" W
Degrees decimal minutes40° 41.350' N, 74° 02.667' W
Plus code87G7MXQ4+M67

Map data © OpenStreetMap contributors. Coordinates are read from the map itself, in the WGS 84 system your phone uses.

Method One: Read It From Standard Form

The standard form of a circle's equation is (x - h)^2 + (y - k)^2 = r^2, where (h, k) is the center and r the radius. Reading the centre is therefore instant, with one trap: the form subtracts h and k, so the signs flip. The equation (x - 3)^2 + (y + 4)^2 = 25 has center (3, -4), not (3, 4), because y + 4 means y - (-4). The radius is the square root of the right side, here 5. The equation (x + 2)^2 + (y - 7)^2 = 9 has center (-2, 7) and radius 3. Say it as a rule: the center is whatever makes each parenthesis zero. Set x - h to zero and x equals h; that value, with its sign as it stands after solving, is the coordinate. This sign flip is the single most common error in the topic, and the zeroing rule is its permanent cure.

Method Two: General Form, by Completing the Square

Textbooks and exam papers prefer the general form, x^2 + y^2 + Dx + Ey + F = 0, which hides the center. Two routes recover it.

The shortcut. The center is (-D/2, -E/2): halve each coefficient and flip its sign. The radius follows from r^2 = h^2 + k^2 - F.

Worked example. x^2 + y^2 - 6x - 8y + 21 = 0. Here D = -6 and E = -8, so h = 3 and k = 4: center (3, 4). Then r^2 = 9 + 16 - 21 = 4, so r = 2.

The longhand, once, so the shortcut is not magic. Group the x terms and complete the square: x^2 - 6x becomes (x - 3)^2 - 9. Group the y terms: y^2 - 8y becomes (y - 4)^2 - 16. Substitute back: (x - 3)^2 - 9 + (y - 4)^2 - 16 + 21 = 0, which tidies to (x - 3)^2 + (y - 4)^2 = 4, standard form, center (3, 4), radius 2, agreeing with the shortcut.

A bigger example. x^2 + y^2 - 4x - 6y - 87 = 0. D = -4, E = -6, so the center is (2, 3). r^2 = 4 + 9 - (-87) = 100, so r = 10. Two checks protect you in general form work: if the x^2 and y^2 coefficients are not equal, it is not a circle at all; and if r^2 comes out negative, the "circle" is imaginary, which usually means a copied sign went wrong upstream.

Method Three: From the Endpoints of a Diameter

The center is the midpoint of any diameter, by definition: the center is the point the diameter passes through, halfway along it. The midpoint formula averages the endpoints coordinate by coordinate.

Worked example. Diameter endpoints (-2, 4) and (6, 16). Midpoint x: (-2 + 6) / 2 = 2. Midpoint y: (4 + 16) / 2 = 10. Center: (2, 10). The radius is half the diameter's length: the endpoints differ by 8 in x and 12 in y, so the length is the square root of 64 + 144 = 208, about 14.42, and the radius is about 7.21. This is the method of the real world as much as the classroom: given the two ends of the widest span across a circular feature on a map, a manhole, a crater, a roundabout, the midpoint is its center, and the explorer above reads the endpoint coordinates off a real map for exactly this kind of measurement. The same averaging idea, applied to more points and shapes, grows into the full topic of how to find centroid coordinates, where the circle's center is the simplest special case.

Maps, a compass, and a vintage camera laid out for travel planning
Maps, a compass, and a vintage camera laid out for travel planning

Method Four: From Three Points on the Circle

Three points on the circumference determine the circle, and its center sits where the perpendicular bisectors of two chords cross, because the center is equidistant from all points on the circle and the perpendicular bisector of a chord is the set of points equidistant from the chord's ends.

Worked example. Points (0, 0), (6, 0), and (0, 8). The chord from (0, 0) to (6, 0) is horizontal; its perpendicular bisector is the vertical line through its midpoint, x = 3. The chord from (0, 0) to (0, 8) is vertical; its bisector is the horizontal line through its midpoint, y = 4. The bisectors cross at (3, 4), the center. Check the radius: the distance from (3, 4) to (0, 0) is the square root of 9 + 16 = 25, exactly 5, and the same 5 reaches the other two points, as it must. When the chords are slanted, the same method works with sloped bisectors: find each chord's midpoint, take the negative reciprocal of the chord's slope for the bisector's slope, write both lines, and solve them together. It is more algebra, but no new idea.

Which Method When

What you are givenMethodWatch out for
Standard form equationRead off (h, k)The sign flip in each parenthesis
General form equationHalve and flip D and E, or complete the squareUnequal x^2 and y^2 coefficients mean not a circle
Diameter endpointsMidpoint formulaRadius is half the endpoint distance
Three points on the circleIntersect two perpendicular bisectorsSlanted chords need the negative reciprocal slope

For coordinate handling practice underneath all four methods, our latitude and longitude practice set and the Cartesian coordinates guide build the pair fluency these calculations assume. However the circle arrives, as an equation, a diameter, or three points, its center is recoverable in a few lines of arithmetic, and now you hold all four sets of lines.

The Error Clinic: Four Mistakes and Their Tells

The sign flip, again. Center reported as (3, 4) for (x - 3)^2 + (y + 4)^2. The tell: your center fails the zeroing test, since plugging x = 3 and y = 4 does not zero the second parenthesis. Cure: solve each parenthesis to zero, every time, out loud. The unsquared radius. Reading r as 25 from a right side of 25. The tell: the "radius" reaches points visibly nearer than that. Cure: the right side is r squared; take the square root as the final step of every read off. Diameter used as radius. From endpoints, reporting the full endpoint distance as r. The tell: the circle drawn with it swallows both endpoints inside it. Cure: the midpoint gives the center, and half the distance gives the radius; the two halves of Method Three are a pair. Halving without flipping in general form. Reporting (D/2, E/2) instead of (-D/2, -E/2). The tell: substituting your center back into the original equation fails to balance. Cure: the substitution check itself, ten seconds of arithmetic that catches all four mistakes in this clinic, and the habit worth more than any single method in this guide.

A Worked Check You Can Do in Your Head

Before trusting any center you have computed, run the substitution habit on a friendly example until it is reflex. Take the circle (x - 5)^2 + (y + 1)^2 = 49. Read off: the center must zero both parentheses, so x = 5 and y = -1, center (5, -1), and the radius is the square root of 49, which is 7. Verify with a point: the topmost point of the circle sits one radius above the center, at (5, 6). Substitute: (5 - 5)^2 + (6 + 1)^2 = 0 + 49 = 49. It balances, so the reading is right. Ten seconds, no apparatus, and the same check scales to every method in this guide: diameter midpoints verified by equal distances, bisector intersections verified by three equal radii, general form centers verified by substitution. Circles reward the verifier because they always confess.

Related Guides

This guide does not stand alone. The coordinates guides below take up the questions it leads into:

Frequently Asked Questions

How do I find the center from the standard form of a circle?

Read the values being subtracted inside the parentheses. In (x - h)^2 + (y - k)^2 = r^2, the center is (h, k). Because the form subtracts, a term written as (y + 4) means h or k is negative there: (x - 3)^2 + (y + 4)^2 = 25 has center (3, -4). The reliable rule: the center coordinates are the values that make each parenthesis zero.

How do I find the center from the general form?

For x^2 + y^2 + Dx + Ey + F = 0, the center is (-D/2, -E/2): halve the x and y coefficients and flip their signs. The radius satisfies r^2 = h^2 + k^2 - F. For example, x^2 + y^2 - 6x - 8y + 21 = 0 gives center (3, 4) and radius 2. Completing the square reaches the same answer and shows why the shortcut works.

How do I find the center if I know two points on the circle?

Two points are not enough by themselves, unless they are the endpoints of a diameter, in which case the center is their midpoint. If the two points are an ordinary chord, the center lies somewhere on the chord's perpendicular bisector, and you need a third point, or the radius, to pin it down.

How do three points determine a circle's center?

Draw two chords between the points. The perpendicular bisector of each chord passes through the center, because the center is equidistant from the chord's endpoints. Where the two bisectors intersect is the center, and its distance to any of the three points is the radius. Three non collinear points always determine exactly one circle.

What if the equation has coefficients on x^2 and y^2?

Divide through so both coefficients become 1, then apply the general form method. If the coefficients cannot be made equal, the equation is not a circle: it may be an ellipse or another conic. If after the method the radius squared comes out negative, there is no real circle, and a sign error in copying is the usual cause.

Is the center of a circle the same as its centroid?

Yes. The center of a circle is its balance point in every sense: the centroid of the disk, of the circumference, and of any symmetric set of points on it all coincide at (h, k). Circles are the perfectly symmetric case of the broader centroid topic, where messier shapes need the fuller methods.

Photo credits: Ronaldo Guiraldelli (Pexels); Nataliya Vaitkevich (Pexels). Photos are served from this site; follow the credit to the library page for the original.