Every QGIS session is a negotiation between the mouse and the keyboard, and the mouse usually wins by default because nobody taught the alternative. Yet the program carries a full default shortcut system, and the operations you perform a hundred times a day, toggling editing, opening the attribute table, zooming to the full extent, undoing the last vertex, are all bound to keys already. This guide organizes the defaults by task rather than alphabetically, because that is how you will use them, then covers the two customizations that matter: the macOS substitutions, and the Keyboard Shortcuts dialog, where every binding in the program can be searched, changed, and exported. Learn a dozen of these and the program visibly speeds up; learn the dialog and you will never be stuck with someone else's choices again.
Home / GIS and Open Map Data for Beginners
QGIS Keyboard Shortcuts: The Defaults by Task, and How to Rebind Them

Photo: Anete Lusina / Pexels
Hands on the Keys: The Shortcut Checklist
Check off each step as you finish it. Your progress stays on this page.
0 of 7 complete
0% done
Project and File Shortcuts: The Ones Every Program Shares
QGIS honors the platform conventions for file work, and they are the safest shortcuts to build first because your hands already know them from every other application:
| Shortcut | Action |
|---|---|
| Ctrl+N | New project |
| Ctrl+O | Open a project |
| Ctrl+S | Save the project |
| Ctrl+Shift+S | Save the project as a new file |
| Ctrl+P | New print layout |
| Ctrl+Q | Quit QGIS |
One warning hides in this friendly table, and it bites every new editor once: Ctrl+S saves the project, not your layer edits. Edits live in the layer's edit buffer until you save the layer (the Save Layer Edits button in the digitizing toolbar, or toggling editing off and accepting the prompt). A user who presses Ctrl+S faithfully and then crashes has saved a project pointing at data whose edits were never committed. Learn the pair together: Ctrl+E toggles editing (below), and saving edits is its own act. The project shortcut family gets you in and out of files; the editing family keeps the work itself.
Canvas Navigation: Moving Without the Mouse
The map canvas has its own keyboard life. The arrow keys pan the canvas in their direction, the fine positioning tool that the mouse never matches when you are aligning a view by a street's width at a time. The mouse wheel zooms, and holding Ctrl while wheeling makes the zoom steps finer, the standard trick for landing on exactly the scale a layout wants. Ctrl+Shift+F zooms to the full extent of all layers, the recovery shortcut for the universal experience of losing the map entirely (it happens to everyone, usually mid-demonstration). While a drawing or editing tool is active, holding the spacebar temporarily turns the cursor into the pan tool, so you can drag the canvas mid-line and resume the line where you left it, the single most useful navigation habit in digitizing. None of these appears in any menu you browse daily, which is precisely why they are worth an article section: navigation shortcuts are invisible until somebody writes them down.

Editing Shortcuts: Where the Real Time Lives
Editing is where shortcuts compound, because editing is hundreds of small acts:
| Shortcut | Action |
|---|---|
| Ctrl+E | Toggle editing on the current layer |
| Ctrl+Z | Undo |
| Ctrl+Y (or Ctrl+Shift+Z) | Redo |
| Delete | Delete the selected features (while editing) |
Undo deserves its reputation as the most pressed shortcut in GIS: QGIS's edit undo walks back vertex placements and edits within the session's edit buffer, which makes experimentation cheap, and cheap experimentation is how careful editors are made. Delete, by contrast, deserves respect: it removes selected features from an editing layer immediately, recoverable by undo within the session and by nothing after the edits are saved, so the professional habit is select, glance at the count, then press.
Selection and the Attribute Table
F6 opens the attribute table of the current layer, the table our attribute table guide teaches in full, and it is the shortcut that turns "let me check the data" from a menu expedition into a reflex. Ctrl+Shift+A deselects all features on all layers, the clean-slate key that ends the common confusion of acting on a selection you forgot existed (a processing run that touched three features instead of three thousand is usually a forgotten selection, and this key is its prevention). Selection itself is mostly mouse work, clicking and boxing on the canvas, but its management is keyboard work: open the table with F6, review what is selected there, clear with Ctrl+Shift+A when the job changes. Build those three into a loop and selections stop being a source of silent errors, which is the most any shortcut can honestly promise.
The macOS Substitutions
On macOS the system follows the platform's grammar: Cmd replaces Ctrl for the standard bindings (Cmd+O opens, Cmd+S saves, Cmd+Q quits, and so on through the tables above), and the dialog lists the bindings as they apply on your machine, which is the authority whenever memory and platform disagree. Two cautions travel with the substitution. Function keys on Mac laptops may need the Fn key held to act as F6 rather than as a brightness or media control, unless the system setting for function keys has been flipped. And some Ctrl-based combinations in the wider QGIS documentation are written for Windows and Linux; when a documented shortcut does nothing on your Mac, the dialog's search (next section) settles what your build actually binds. Treat every printed shortcut table, this one included, as a map of a territory the dialog owns.
Rebinding: The Keyboard Shortcuts Dialog
Everything above is negotiable. Settings, Keyboard Shortcuts opens the dialog that governs all of it: a searchable list of every action in the program with its current binding. The workflow is uniform: search the action by name, select it, and assign a new key combination, or clear the binding entirely. Three disciplines keep rebinding safe. First, change few: a shortcut system is a language, and wholesale relearning costs more than any single binding saves; rebind the two or three actions you perform constantly that lack good defaults. Second, avoid collisions with meaning: the dialog warns when a combination is already taken, and overriding a core binding (undo, save) to free a key is borrowing from your future self at high interest. Third, export your set: the dialog can save your shortcut configuration to a file, which belongs with your other QGIS customizations, so a new machine or a reinstall restores your hands' knowledge in one import instead of a month of re-teaching. A rebound QGIS that only you can drive is a liability on a shared machine; an exported configuration is a professional asset.
Learning Them in the Order You Will Use Them
Do not memorize this article. Take the shortcuts in the order your work presents them: this week, F6 and Ctrl+Shift+A, because tables and selections are every session; next, Ctrl+E and the save-edits habit, because editing without them is friction wearing a disguise; then the spacebar pan and Ctrl+Shift+F, because navigation pain is daily; then the digitizing panel's locks when precision work arrives. A shortcut learned inside the task that needs it sticks; a shortcut memorized from a list evaporates by Friday. The program will meet you halfway: hover over any toolbar button and the tooltip shows its binding, a teacher built into every pause. What the keyboard ultimately buys is not speed, exactly. It buys unbroken attention: the eyes stay on the map, the hand stays on the work, and the program recedes, which is what a tool is for. The processing toolbox and the rest of this site's QGIS guides assume that fluency; this article is where it starts.
When Shortcuts Collide With the Operating System
Some bindings fail for reasons outside QGIS, and knowing the usual suspects saves a confused hour. Window managers and operating systems reserve combinations for themselves (workspace switching, screen capture, input method changes), and a reserved combination never reaches the application, so the dialog will happily show a binding that the OS silently eats; the cure is to choose a neighboring combination, not to debug QGIS. Laptop function keys may default to hardware controls, which is why F6 sometimes adjusts brightness instead of opening the attribute table until the Fn setting is flipped. Keyboard layouts move keys: a shortcut documented as a letter is stable, but one documented as a punctuation key may live somewhere else entirely on a non-US layout, and the dialog's search by action name is again the settlement. And remote and virtual sessions add their own interception layer. The general rule: when a shortcut does nothing, test it in the dialog's own search (does the action exist, what is it bound to), then suspect the layers above the application in order, OS, hardware, session, before suspecting QGIS. Most "broken" shortcuts are healthy bindings shouting into a room the operating system already left.
A Starter Set to Learn in a Week
For readers who want a plan rather than a catalog: five bindings, one per day of a working week, each chosen because it pays rent daily. Monday, F6, the attribute table, because data questions outnumber all others. Tuesday, Ctrl+E with its save-edits partner, because editing is the week's main verb. Wednesday, Ctrl+Shift+A, the clean slate, because selection confusion is the week's commonest silent error. Thursday, the spacebar pan, because navigation friction is invisible until it is gone. Friday, Ctrl+Shift+F, the full extent, because everyone loses the map and recovering instantly is a small daily dignity. The digitizing locks and the dialog itself wait for the second week, when the hands have learned the first five by using them inside real work rather than by rehearsing them in an empty project. A shortcut a day, anchored to the task that needs it: that is the whole pedagogy, and it is deliberately unambitious, because fluency built this way survives, and fluency crammed does not.
Related Guides
If this page answered part of the question, these GIS guides cover the rest of the same ground:
- QGIS Advanced Digitizing: The CAD Panel and Its Keyboard Locks: The d, a, x, and y locks, the highest-value keys in the program.
- QGIS Attribute Table: Read, Sort, Filter, and Edit in Place: What F6 opens, taught in full.
- QGIS Processing Toolbox: Run, Batch, Model, Repeat: The framework your hands will operate faster with every shortcut above.
- QGIS Symbology: Single, Categorized, and Graduated Styles: The panel work that fills the sessions these shortcuts speed up.
Frequently Asked Questions
Where can I see all QGIS keyboard shortcuts?
In the program itself: Settings, Keyboard Shortcuts opens a searchable dialog listing every action and its current binding. It is the authority for your installation and platform, and it is also where bindings can be changed, cleared, and exported.
What does Ctrl+S save in QGIS: the project or my edits?
The project. Layer edits live in an edit buffer until you save the layer's edits explicitly (the Save Layer Edits control, or toggling editing off and confirming). Pressing Ctrl+S alone does not commit feature edits, which is the most common cause of "lost" QGIS work.
How do I open the attribute table with the keyboard?
Press F6 with a layer current, and its attribute table opens. On macOS laptops you may need to hold Fn as well, depending on the function key setting. Ctrl+Shift+A deselects all features when you need a clean slate.
Can I change QGIS shortcuts to match another program?
Yes. The Keyboard Shortcuts dialog lets you rebind any action. Change only the few you use constantly, heed the dialog's collision warnings, and export your configuration file so the setup can be restored or moved to another machine.
What are the most useful QGIS shortcuts to learn first?
F6 for the attribute table, Ctrl+E to toggle editing, Ctrl+Z for undo, Ctrl+Shift+F for the full extent, the spacebar's temporary pan while drawing, and, for precise digitizing, the Advanced Digitizing panel's d, a, x, and y locks.
Photo credits: Anete Lusina (Pexels); Pew Nguyen (Pexels). Photos are served from this site; follow the credit to the library page for the original.