Home / Coordinates and Location Formats

How to Find Coordinates on a Garmin GPS: Handhelds, Car Units, and Watches, in the Right Format

A man in a beige jacket holding a map and a handheld device outdoors

Photo: Tima Miroshnichenko / Pexels

Every Garmin, from a hiking handheld to a dashboard unit to a running watch, is continuously computing the answer to one question: where am I, in latitude and longitude. Getting that answer off the screen, in a format that matches the map, the geocache listing, or the person waiting for it, is a small skill with three variations, one per device family. This guide covers all three, plus the two settings that decide whether the numbers are right: the position format and the map datum. It is the device companion to our GPS coordinates apps roundup for phones; the Garmin advantage is a dedicated receiver that works all day with no signal beyond the satellites themselves.

Interactive tool

Garmin Coordinates: Get the Number Right

Check off each step as you finish it. Your progress stays on this page.

0 of 7 complete

0% done

Handhelds: eTrex, GPSMAP, Montana, Oregon

On Garmin's outdoor handhelds, your current position is never more than a screen or two away:

  1. Go outside or to a window and let the unit acquire satellites; the satellite page shows the fix building.
  2. Your current coordinates appear on the satellite page and in the location data field on the map and trip computer pages.
  3. To capture the spot permanently, use Mark (the Mark Waypoint function) wherever you are standing. The unit saves a waypoint at your exact position and displays its coordinates, ready to rename, share, or navigate back to.

Marking a waypoint is the professional habit: the live readout vanishes when you move, while the waypoint is the position, frozen, with a name. For a trailhead, a vehicle, a cache you hid, or a spot you must describe to rescuers, mark it.

Set the format before you read the number. Go to the main menu, then Setup, then Position Format. Three choices live there:

  • Position Format: the shape of the numbers (decimal degrees; degrees and decimal minutes; degrees, minutes, and seconds). Match it to whatever will receive the coordinates: geocaching listings use degrees and decimal minutes, most web maps use decimal degrees.
  • Map Datum: leave this on WGS 84 unless a paper map explicitly names a different datum (see the warning below).
  • Map Spheroid: follows the datum; leave it alone.

Car Units: Garmin Drive and DriveSmart

Dashboard units answer the question in two places, because drivers ask it two ways.

Where am I right now? Use the Where Am I function (in the apps or info area of the main menu). It shows your current location details, including the nearest address and intersection and your coordinates, alongside the emergency-services information the screen is designed around. It is the screen to read to a dispatcher.

Entering coordinates someone gave you: from the main search, choose Where To, then Coordinates. Before typing, tap Format and pick the shape that matches your source: the unit offers decimal degrees, degrees with decimal minutes, and degrees with minutes and seconds. Entering a decimal-degrees pair into a minutes field is the classic way to land a mile from the destination, so set the format first, then type. The unit then routes to the point like any address.

Watches: Fenix, Forerunner, Instinct

On Garmin watches there is no map page to glance at, so the pattern is activity-based:

  1. Go outdoors and start an outdoor activity (or open the GPS/location widget or control, depending on model; on many models, holding the GPS button opens location options).
  2. Wait for the GPS indicator to confirm a fix. Reading the position before the fix settles gives you the watch's first guess, not its answer.
  3. Choose Save Location (or mark the position from the activity options) to store the point with its coordinates, which you can then view in the saved locations list and sync to Garmin Connect and the Explore app.

As on the handhelds, the watch has a position format setting (in its system or activity settings, and mirrored in Garmin Connect) that decides the shape of the numbers, and the same datum rule applies. For a runner or hiker, the saved location is the feature with a real safety case: save the trailhead before you start, and the watch can navigate you back to your own car with no phone involved.

A man in an orange cap holding a compass over a map outdoors
A man in an orange cap holding a compass over a map outdoors

The Datum Warning: The One Setting That Can Move You

Position format changes how coordinates look; the datum changes what they mean. The same latitude and longitude numbers refer to different ground points under different datums, and the difference between WGS 84 and an older regional datum like NAD27 can run to hundreds of meters. Every Garmin ships set to WGS 84, which matches GPS itself, every web map, and every modern listing. The rule is absolute: leave the datum on WGS 84 unless the specific paper map you are using prints a different datum in its legend, in which case set the unit to match that map for as long as you use it, and set it back afterward. More lost hikers have been manufactured by a stray datum setting than by any hardware failure, because the unit reports its (wrong-datum) numbers with total confidence. If coordinates from your Garmin ever disagree with a phone standing in the same spot by a suspiciously consistent distance, check the datum on both before you check anything else. The format families behind this are explained in our latitude and longitude vs northing and easting guide.

Signal Reality: Giving the Unit Its Best Chance

A Garmin's coordinates are only as good as its current fix, and fix quality is a physical condition, not a setting. Modern Garmin units listen to several satellite constellations at once, which is why they hold a fix in canyons and tree cover that defeated older single-system receivers, but no constellation sees through a roof, a car park, or the inside of a pack. Three habits govern accuracy in the field. Let the fix settle: after a cold start, a long sleep, or a flight to a new region, the first coordinates appear quickly and improve over the following minutes as the unit downloads fresh satellite data; for a position that matters, a cache, a boundary, a rescue, wait for the accuracy readout to stabilize before marking. Hold the unit in the open, away from your body and metal, for the reading that counts. Read the accuracy estimate the unit shows you alongside the coordinates on the satellite page, and report it with the pair when you share it; a position good to 3 meters and a position good to 30 meters are different instruments wearing the same digits, and the person receiving them deserves to know which one you are holding.

Sending Coordinates to a Garmin, and Sharing Yours From One

The reverse journey matters as much as the readout. To navigate to coordinates on a handheld, the pattern mirrors the car units: open the Where To or Find menu, choose Coordinates, set the format first (the unit will offer the same three shapes), then enter the pair and choose Go. The unit draws a straight-line bearing and distance at first, or routes on trails and roads if it carries routable maps for the area, and the distinction matters in the field: a bearing line crosses lakes and cliffs with total indifference, so treat the first line as a direction, not a path. To share a position you have marked, handhelds offer several exits: Garmin's Explore and Connect apps sync waypoints to your phone when the devices are paired, where the coordinates can be copied into any message; many outdoor models can also send a waypoint wirelessly to a nearby compatible Garmin. In an emergency the format discipline from the previous section is the whole game: read the pair slowly, state the format and datum (decimal degrees, WGS 84, if you followed this guide's defaults), and have the listener read it back. Coordinates survive bad connections and noisy rooms better than place names do, which is why rescue services ask for them, and why the five minutes spent setting your unit's format before the trip pays out on the worst day rather than the best one.

Reading Coordinates Off the Unit and Into the World

A few habits make the numbers useful once they leave the screen. Copy the format with the number: "42.3601, -71.0589" is incomplete information unless the reader knows it is decimal degrees, so say the format aloud or write it down with the pair. Mind the sign: longitude west of Greenwich and latitude south of the equator are negative in decimal form, and a dropped minus sign moves the point to another hemisphere. Check plausibility before you travel: paste the pair into any web map at home, which is the five-second test that catches transposed digits, swapped latitude and longitude, and format mismatches, the three clerical errors that account for nearly every bad coordinate story. And if the coordinates came from a paper map, confirm the datum question above before you blame the unit.

Related Guides

If this page answered part of the question, these coordinates guides cover the rest of the same ground:

Frequently Asked Questions

How do I see my current coordinates on a Garmin handheld?

Let the unit acquire satellites outdoors, then read the location on the satellite page or the location data field on the map or trip computer page. To keep the position, use Mark Waypoint where you stand; the saved waypoint displays its coordinates in the format you have set under Setup, then Position Format.

Where is the position format setting on a Garmin?

On handhelds: main menu, Setup, Position Format, where you choose the format (decimal degrees, degrees and decimal minutes, or degrees minutes seconds) and the map datum. Car units set the format on the coordinate entry screen itself, with the Format button. Watches carry it in their system or activity settings and in Garmin Connect.

How do I enter coordinates into a Garmin car GPS?

Choose Where To, then Coordinates. Tap Format first and select the shape that matches the numbers you were given (decimal degrees, degrees and decimal minutes, or degrees minutes seconds), then type the pair and start the route. Setting the format before typing prevents the most common entry error.

Should I change the map datum from WGS 84?

Almost never. WGS 84 is the datum GPS itself uses and the one every web map and modern listing assumes. Change it only to match a specific paper map whose legend names a different datum, and change it back afterward. A mismatched datum can shift a point by hundreds of meters while looking perfectly precise.

How do I save my current location on a Garmin watch?

Start an outdoor activity or open the location controls, wait for a solid GPS fix, then choose Save Location. The point is stored with its coordinates in your saved locations and syncs to Garmin Connect. Saving the trailhead before a hike lets the watch navigate you back to it without your phone.

Photo credits: Tima Miroshnichenko (Pexels); Tima Miroshnichenko (Pexels). Photos are served from this site; follow the credit to the library page for the original.